TurboPrint & PrintFab

I use Turboprint in Linux with the Epson Artisan 810 and there are two options in the printer for paper tray (paper and photo). Unfortunately, Turboprint only provides one option and no matter how I try I can't get it to use the photo tray when printing.

The gutenberg driver can differentiate the two trays and offers the options, but Turboprint does not.

Does anyone know how to fix this?

Hello,

there is actually was no such setting in the driver - the printer loads smaller sheets like 4x6 inches / 10x15 cm automatically from the photo tray (this is the same as in Epson's Windows driver).

See also this thread:

http://www.turboprint.info/support/viewtopic.php?t=727