Color chart for printer profile - black bleeds
Posted: Mon Sep 27, 2021 10:26 am
Hi ZEDOnet,
I am building the Printer Profile request from the PrintFab toolbox and facing the issue with the chart prints.
I print the Limit Test Row for Ink - I see that 250 is ok there. But when I print the chart using that ink level - I have a problem with black ink, that badly bleeds. I have tried to limit the inks to 150 - but it barely does any effect on black ink. Here is the example of test chart with black inc bleeds (visible on the black bar on the top and black patch near yellowish patch).
What I shall do now? What I see there is that any color patch are ok - but black is bad. Is it ok to send this printed chart to you or it is unusable?
To completeness the printer I use is Epson EcoTank ET-2712.
I am building the Printer Profile request from the PrintFab toolbox and facing the issue with the chart prints.
I print the Limit Test Row for Ink - I see that 250 is ok there. But when I print the chart using that ink level - I have a problem with black ink, that badly bleeds. I have tried to limit the inks to 150 - but it barely does any effect on black ink. Here is the example of test chart with black inc bleeds (visible on the black bar on the top and black patch near yellowish patch).
What I shall do now? What I see there is that any color patch are ok - but black is bad. Is it ok to send this printed chart to you or it is unusable?
To completeness the printer I use is Epson EcoTank ET-2712.