System Error when printing on DesignJet using PrintFab driver

Post Reply
bruno_iii
Posts: 7
Joined: Tue Jul 21, 2020 8:25 am

System Error when printing on DesignJet using PrintFab driver

Post by bruno_iii »

Hi fellow PrintFab users,

every time I try to print on a HP DesignJet 500 using the PrintFab driver just before the print is finished I get a "Sysstem Error 79:04" and I have to reset the printer before I can start another print. This does not happen when I use the HP driver.

Any ideas what could cause this kind of problem?

Thanks!
zedonet
Site Admin
Posts: 2156
Joined: Fri Oct 06, 2006 8:02 am

Re: System Error when printing on DesignJet using PrintFab driver

Post by zedonet »

Hello, the "system error 79:04" may occur when printing at the highest resolution (2400dpi). Printing at 300-1200dpi should work.

Please let me know if this solves the problem.
Post Reply