Hi fellow PrintFab users,
every time I try to print on a HP DesignJet 500 using the PrintFab driver just before the print is finished I get a "Sysstem Error 79:04" and I have to reset the printer before I can start another print. This does not happen when I use the HP driver.
Any ideas what could cause this kind of problem?
Thanks!
System Error when printing on DesignJet using PrintFab driver
Re: System Error when printing on DesignJet using PrintFab driver
Hello, the "system error 79:04" may occur when printing at the highest resolution (2400dpi). Printing at 300-1200dpi should work.
Please let me know if this solves the problem.
Please let me know if this solves the problem.