TurboPrint & PrintFab

Posted: **Mon Dec 05, 2022 3:17 pm**

Hi fellow PrintFab users,

every time I try to print on a HP DesignJet 500 using the PrintFab driver just before the print is finished I get a "Sysstem Error 79:04" and I have to reset the printer before I can start another print. This does not happen when I use the HP driver.

Any ideas what could cause this kind of problem?

Thanks!

Posted: **Thu Dec 08, 2022 2:11 pm**

Hello, the "system error 79:04" may occur when printing at the highest resolution (2400dpi). Printing at 300-1200dpi should work.

Please let me know if this solves the problem.

TurboPrint & PrintFab

System Error when printing on DesignJet using PrintFab driver

System Error when printing on DesignJet using PrintFab driver

Re: System Error when printing on DesignJet using PrintFab driver