Page 1 of 1
Lost screen print ocntrols after adding printer.
Posted: Wed Mar 04, 2026 3:48 pm
by cabezon37
I had to delete and add the PrintFab printer again and now I do not have density control over films. They all print light. I have the special screen print option selected in the print options but it is different than bfore and dowesn't seem to do anything. Everything prints light.
Any ideas?
Re: Lost screen print ocntrols after adding printer.
Posted: Thu Mar 05, 2026 9:58 am
by zedonet
Hello, if you are using a "Preset" in the macOS print dialog, make sure to check if the "PrintFab Settings" and "Printer Settings" are still correct. If not, please create a new "Preset" with your screen printing settings.
If you are using the new PrintFab 3, please check your print settings in the PrintFab Composer.
Have a look at the following web page for the settings that are relevant for film printing:
https://www.zedonet.com/en_support_mac_silkscreen.phtml