TurboPrint & PrintFab

I have an Epson WF 110 that you advised me to use the ET2700 driver for to gain access to better ink controls. It was working great for about a week. I set a custom 8x10" print size and have been making text prints. I went to make a maintenance print this evening and using the following combination no longer prints past 50% of the width of paper:

Custom 8x10 paper size
Epson Inkjet Paper setting

If I choose US letter size it will print fine. Or 8x10 and plain paper.

To be clear, if the image spans the width of the page, it is cut off cleanly at 50%. If the image is small and on the right side of the page, the print head will move to position and the printer appears to be printing, but nothing happens. But the printer does register an ink usage. So the printer believes that it is printing. And no matter the page size, it always goes to the proper spot to start.

In my trouble shooting, I uninstalled Print Fab and reinstalled it and set the printer driver back up. Now, when printing from Lightroom the print preview is very dark. It was not before. I test with the official Epson driver and it's print preview and it is fine. And the prints from the Epson driver come out with the correct brightness, but the printfab prints after the reinstall are now dark. Nothing else has changed.

I was so excited, I was a couple of test prints away from purchasing. Please advise how to fix these issues. I really love the software.

Thanks

Update

So I've uninstalled and reinstalled PrintFab again. I've uninstalled the Epson driver for every other Epson that I have ever printed from thinking there might be a clash of some sort.

Nothing is working. No paper type at all is working with the 8x10 size now. The printer recognizes the paper size and the print head moves over the correct area of the paper, back and forth as if it's printing, but no ink is laid down. If I shift the print to the left side of the paper, it prints. If I choose US Letter size, it prints.

I'm lost with this one.

Thanks

Hello, we are in email contact. It is not clear yet if the problem is caused by using a different printer driver or if there is another cause.