printfab problem

fotokeramika
Posts: 9
Joined: Fri Aug 24, 2018 7:36 am

Re: printfab problem

Post by fotokeramika » Mon Apr 08, 2019 3:35 pm

1-Print black, then reload paper and print cyan ink, magenta yellow- YES--You can see the principle of work on you tube-ceramic waterslide printer
2-portrait-TOP FEED--paper is going to take off 216x356mm from the cassette
3-I can not print from the cassette
from the Epson program prints well

fotokeramika
Posts: 9
Joined: Fri Aug 24, 2018 7:36 am

Re: printfab problem

Post by fotokeramika » Mon Apr 08, 2019 3:45 pm

SCREEN LPI-90 LIMITED ONLY ON 90

fotokeramika
Posts: 9
Joined: Fri Aug 24, 2018 7:36 am

Re: printfab problem

Post by fotokeramika » Mon Apr 08, 2019 3:50 pm

Ceramic Printing Process -ceramic waterslide printer-YOU TUBE-EPSON B310N

zedonet
Site Admin
Posts: 1770
Joined: Fri Oct 06, 2006 8:02 am

Re: printfab problem

Post by zedonet » Fri Apr 12, 2019 8:49 am

Thank you for the helpful video. Now I understand the print process better. However, I can't explain the problem yet.

Is the problem always the same - black printed okay, cyan printed too far left (about 5mm?).

You could send the PrintFab log files. It would be best if you send the files directly after printing the colors black and cyan.

To send the log files:
In the "Start" menu, open

Start -> All programs -> PrintFab -> Show log files

and enclose the file "printfab_preview.log". You can create a ZIP archive (e.g. compress from Windows Explorer using the right-mouse-button option "Send to ZIP archive") and send it by email.

fotokeramika
Posts: 9
Joined: Fri Aug 24, 2018 7:36 am

Re: printfab problem

Post by fotokeramika » Fri Apr 12, 2019 7:40 pm

цијан штампан предалеко лево (око 5мм?).---- da

Post Reply