printfab problem
-
- Posts: 7
- Joined: Fri Aug 24, 2018 7:36 am
Re: printfab problem
SCREEN LPI-90 LIMITED ONLY ON 90
-
- Posts: 7
- Joined: Fri Aug 24, 2018 7:36 am
Re: printfab problem
Ceramic Printing Process -ceramic waterslide printer-YOU TUBE-EPSON B310N
Re: printfab problem
Thank you for the helpful video. Now I understand the print process better. However, I can't explain the problem yet.
Is the problem always the same - black printed okay, cyan printed too far left (about 5mm?).
You could send the PrintFab log files. It would be best if you send the files directly after printing the colors black and cyan.
To send the log files:
In the "Start" menu, open
Start -> All programs -> PrintFab -> Show log files
and enclose the file "printfab_preview.log". You can create a ZIP archive (e.g. compress from Windows Explorer using the right-mouse-button option "Send to ZIP archive") and send it by email.
Is the problem always the same - black printed okay, cyan printed too far left (about 5mm?).
You could send the PrintFab log files. It would be best if you send the files directly after printing the colors black and cyan.
To send the log files:
In the "Start" menu, open
Start -> All programs -> PrintFab -> Show log files
and enclose the file "printfab_preview.log". You can create a ZIP archive (e.g. compress from Windows Explorer using the right-mouse-button option "Send to ZIP archive") and send it by email.